Displaydoorparts.com

A Division of

Walk In Cooler Central Market

Model and Serial #'s for Ardco sets are typically NOT on the doors at all. They are typically on the main frame of the set, supporting the doors. There may be more then one frame in a line up. It is often on the inner portion of the walk in or unit, along the top on this framing. It will ALWAYS say Ardco on it.  This can sometimes apply to Ardco DisplayRite, Freezerite or CoolRite Doors as well. ALSO open the doors and look on the front of the framing. There could also be serial tags on the top, bottom or sides of one of the doors. In all case of Ardco Doors, look for the B/M number, it is important in locating the correct parts.

The first 3-5 numbers in an Anthony Model number are the numbers you need to browse the Anthony Parts Book . In most cases you need that model and the date of manufacture. The easiest way to find these two numbers is by looking up and in between the panes of glass at the metal spacer bars. CAT 769,770 and ANGLASS are NOT the model# !! With gaskets and heater wires or replacement doors, you need an exact outside door measurement as well. If you do not find a model #, look and see if the gaskets are attached to the frame work. If the gaskets are attached to the frame work, That is a model 1000. 

W/O#'s can be helpful- they are on the white AI sticker UL Label of all Anthony and some Ardco Doors, most likely stuck to the main framing of the set if not the top, bottom or sides of the door. If your doors are ARDCO and older then 1990, there will be no W/O#.